8 maintenance and service, 1 maintenance – Martin Christ Epsilon 2-10D LSCplus User Manual

Page 94

Advertising
background image

Freeze-dryer EPSILON 2-10D LSCplus

8 Maintenance and service

94

Version 04/2013, Rev. 1.5 of 16/12/2014 • sb

Translation of the original operating manual

Pos: 201 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 Wa rtun g un d Ins tan dhalt ung == === == == === == == === == == == == @ 25\ mod _14 049 840 9570 4_6 8.d ocx @ 184 307 @ 1 @ 1

8 Maintenance and service

The freeze-dryer and the accessories are subject to high mechanical
stress. Thorough maintenance performed by the user extends the service
life and prevents premature failure.

CAUTION

If corrosion or other damage occurs due to improper care, the
manufacturer cannot be held liable or subject to any warranty claims.

• Use soap water or other water-soluble, mild cleaning agents for

cleaning the freeze-dryer and the accessories.

• Do not use corrosive and aggressive substances.
• Do not use solvents.
• Do not use agents with abrasive particles.
• Do not expose the freeze-dryer or its accessories to intensive UV

radiation (e.g. sunlight) or thermal stress (e.g. by heat generators).

• Do not turn the unit upside down in order to clean it.

Pos: 202 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1

Pos: 203 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10 Wart ungs arb eiten -- --- -- --- --- -- --- -- --- -- --- --- -- --- -- --- --- -- --- -- --- -- --- --- -- --- -- --- - @ 25\ mod_ 140 498 409 668 0_6 8.doc x @ 1 843 21 @ 2 @ 1

8.1 Maintenance

Pos: 204 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 80 Wa rtun g u nd In stan dhalt ung/ 080 -00 10- 001 0 G efri ertr ockn ungs anla ge @ 25\ mod _14 0498 409 783 2_6 8.do cx @ 1 843 35 @ 3 @ 1

8.1.1 Freeze-dryer

• Switch the freeze-dryer off by actuating the mains power switch and

disconnect the power cord from the wall outlet before cleaning.

• Remove product residues thoroughly with a cloth.
• If the freeze-dryer has been contaminated with toxic, radioactive, or

pathogenic substances, clean the inside immediately with a suitable
decontamination agent (depending on the type of contamination, see
(see chapter 8.2 - "Disinfection of the drying chamber and
accessories")).

WARNING

Take suitable precautions for your own safety if there is a risk of toxic,
radioactive, or pathogenic contamination.


• Open the lid/drying chamber when the freeze-dryer is not in use so

moisture can evaporate.

Pos: 205 /01 0 Univ ersal mod ule/Seit enwec hsel @ 0\m od_ 120 211 624 4312 _0. docx @ 10 5 @ @ 1

Advertising