Martin Christ Epsilon 2-10D LSCplus - Manual (Page 49)

Freeze-dryer EPSILON 2-10D LSCplus
6 Operation
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
49
Translation of the original operating manual
Fig. 29: Dialog box "Pressure increase test"
• The "Test stop" button stops the pressure increase test.
Option: LyoBalance weighing system
If the freeze-dryer is equipped with a LyoBalance weighing system (see
chapter 6.6 - "Optional extensions and special equipment"), then the
corresponding parameters must be configured in this dialog box.
NOTE
Please refer to the separate operating instructions of the weighing system!
Dialog box "Schematic system diagram" (6)
Pressing the button "Schematic system diagram" displays a schematic
diagram of the system on the left-hand side of the screen, including all the
components. Active components are displayed in green. Touching a
component calls up its name and reference designator.
Fig. 30: Schematic system diagram with the name and reference designator of the
component