Martin Christ Epsilon 2-10D LSCplus User Manual

Page 83

Advertising
background image

Freeze-dryer EPSILON 2-10D LSCplus

6 Operation

Version 04/2013, Rev. 1.5 of 16/12/2014 • sb

83

Translation of the original operating manual

6.5.3.3 Copying a program

If a new program is to be created based on an already existing program,
the already existing program can be copied. A free program storage
location must be available for this purpose.
• Select the program to be copied from the list in the main window

"Program".

• Press the button with the program name in order to call up a window

with the program data.

• Press the button “Copy program” in order to create a copy of the

existing program.

• Edit and save the copy (see chapter 6.5.3.1 - "Creating a program").
• Close the dialog box by pressing the “Program” button.
The program will be automatically assigned to the first free program storage
location.

Pos: 162 /01 0 Univ ersal mod ule/L eerz eile @ 0\m od_ 120 211 624 450 0_0. docx @ 11 4 @ @ 1

Pos: 163 /20 0 Ch rist/3 60 G T-BA L abo r-Pilot (STANDARDMODU LE)/0 60 Bet rieb/ LSCplus/ 060 -00 50- 003 3-0 040 Prog ra mm la den @ 2 5\m od_ 1404 984 002 690 _68. docx @ 18 401 2 @ 4 @ 1

6.5.3.4 Loading a program

If a freeze-drying process is to be executed and controlled by a program,
the program must be loaded.
• Call up the main window "Program". This window includes a list of all

the programs that are saved.

• Press the button "Load" behind the program name. A dialog box will be

displayed in which the start section, the start time or the start
temperature can be adapted to any specific needs. The "Info" button
can be used to call up a brief description of the active program,
including information concerning the remaining runtime and the end of
the program. It also enables a graphical representation of the process
sequence.

Fig. 73: Dialog box "Load program"

• Press the button "Load" in order to accept the program data. The

display switches to the standard user interface.

• Press the button "Program start" in order to start the freeze-drying

process.

Advertising