Martin Christ Epsilon 2-10D LSCplus - Manual (Page 63)

Freeze-dryer EPSILON 2-10D LSCplus
6 Operation
Version 04/2013, Rev. 1.5 of 16/12/2014 • sb
63
Translation of the original operating manual
WTMplus configuration (7)
NOTE
The dialog box is displayed for information purposes only.
The configuration can be changed only via the LPCplus user interface.
This dialog box shows all of the existing WTMplus sensors. Every sensor is
assigned to a measuring channel based on its serial number. Next to the
Number of the measuring channel and the serial number of the sensor, the
associated temperature and a signal quality index (SQI) are displayed. A
bar in the fields indicates the signal quality:
• Green: good signal quality
• Yellow: medium signal quality
• Red: insufficient signal
Fig. 51: Dialog box "WTMplus configuration"