Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 25)

Operation • 2
2-9 SV61656 Rev. A
Creating a New Job
This section takes you step-by-step through the process of setting
up a new job and saving it in memory.
Throughout the programming sequence, an asterisk (*) will flash on
the display next to the item you’re setting. Use the Prev (◄) and
Next (►) buttons to step forward or backward through the available
settings. Once an option displays, use the Change (+/-) buttons to
select the option or value you want.
Note: Your machine may be equipped with OMR (Optical Mark
Recognition) scanning, depending on the model you pur-
chased. To program an OMR job, go to page 3-10 of this
guide. To program a non-OMR job, continue by entering the
Setup Mode…
Programming Jobs
You can program your machine with jobs that you can recall at the
touch of a button.
All models have 20 operator-programmable jobs plus one default job
that your Pitney Bowes Service Representative normally sets.
Entering the Setup Mode
Open the hinged cover to the
right of the display. This exposes
the setup buttons.
Press
Setup. The indicator lights
and the machine asks for an ac-
cess code. This code prevents
the machine’s settings being
changed by unauthorized per-
sonnel.
Use the
Change (+/-) buttons to
select the access code 71.
Press Next (►) to advance to the
next setting…