Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 44)

3 • OMR
3-6 SV61656 Rev. A
OMR Marks Available
This section gives brief descriptions of the OMR marks that can or
must be allocated to an OMR Code.
Note: Some marks within this section are available as added
features which expand OMR capability. Contact
your local Pitney Bowes office for details. OMR features
will vary, depending on the options you purchased.
Benchmark
This is a mandatory mark. It must be the frst mark of the code and
will appear on every page within the set.
Safety
This is a mandatory mark that improves the integrity of your mail
piece. It is automatically placed immediately after the benchmark.
End-of-Collation (EOC)
This mark indicates that it is the last sheet fed wthn the collaton/set
(the address sheet).
Your system operates on the absence of this mark, that is, the action
will take place if the mark is NOT read by the scanner. It is therefore
indicated on the OMR code as Not EOC.
Beginning-of-Collation (BOC)
This mark indicates that it is the frst sheet fed wthn the collaton/set.
Your system operates on the absence of this mark, that is, the action
will take place if the mark is NOT read by the scanner. It is therefore
indicated on the OMR code as Not BOC.
Parity
This mark is a security feature, that when printed, always makes the
number of marks total an even number. If any one of the marks within
the code is missed during scanning, the machine will stop, allowing
the operator to correct the error.