Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 63)

Reference • 4
4-5 SV61656 Rev. A
Problem Remedy Page
MACHINE
Blank Screen
No power.
Check that power cord is firmly con-
nected and wall socket is switched
ON.
1-1
Machine not
switched ON.
Turn power switch (located on left
side) ON.
2-1
Machine will not Operate
Cover open.
Check that ALL covers are closed—
check display for cover information.
Feed trays/fold
plates not located
correctly.
Remove and relocate all feeders
and fold plates. Make sure they are
fully seated.
4-2
Insertion Problems
Outer envelope
contents do not
enter the envelope
correctly.
Check envelope troubleshooting
table.
Check that fold selected is correct
for the material size you’re using.
If you’re running heavy or light ma-
terial, you may have to change the
envelope stop adjustment.
4-6
2-17
2-18
2-19
General Troubleshooting