Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 72)

4 • Reference
4-14 SV61656 Rev. A
Number of
sheets
Paper Weights in Pounds
16-20 20-26 26-32
1 C,Z,S,D C,Z,S,D C,Z,S,D
2 C,Z,S,D C,Z,S,D C,Z,S
3 C,Z,S,D C,Z,S C,Z,S
4 C,Z,S C,Z,S
5 C,Z,S
Fold Types: C = C-Fold, Z = Z -Fold, S = Single Fold, D = Double Fold
Fold Type and Overall Thickness Limits
The table below shows the maximum number of sheets that can
be accumulated or collated for each fold type, based on different
weights of paper.
Important! DO NOT program jobs that exceed these maximums or
impose them by OMR code printing and/or OMR selective feed.
Note: You can use the sheet limits above with one additional sheet
from the supplementary feeder plus one insert, only if total mail piece
contents do not exceed 0.078 in. (2mm) total compressed thicknes
For single fold only, using 16 lb. to 20 lb. (60-75g/m 2 ) paper only, you
can place up to 10 items in an envelope. This maximum includes any
additional sheet from the supplementary feeder and/or insert feeder.
The overall maximum compressed thickness of 0.078 in. (2mm) still
applies.