Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 60)

4 • Reference
4-2 SV61656 Rev. A
Removal and Replacement of the Sheet Feeder Trays
To remove…
Lift the rear of the tray slightly
and pull it straight out from the
machine.
Note:
If the tray is loaded, gently hold
the material in place to prevent
it sliding forward as you remove
the tray.
To replace…
Place the tray into its location guides in the side frames. Lift the rear
of the tray slightly and push it into the machine. The tray will auto-
matically drop into its correct position.
Removal and Replacement of the Fold Plates
To remove…
Pull the two catches on the un-
derside of the plate outward to re-
lease them. Pull the plate straight
out of the machine.
To replace…
Pull the two catches on the un-
derside of the plate outward to
release them. Slide the plate into its location guides and release the
catches to lock the plate in position.
Removal and Replacement of the Insert Tray
To remove…
Pull the insert tray straight out
from the machine.
To replace…
Slide the tray into its location
guides and push until it clicks into
place.