Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 35)

Operation • 2
2-19 SV61656 Rev. A
Envelope Stop
Select the position of the ma-
chine’s envelope stop.
The stop has five positions num-
bered 1 to 5. Setting 3 is the
standard setting for normal weight
paper with standard folds. A thin-
ner/lighter insert will require a
lower setting and thicker/heavier insert a higher setting.
Press
Change (+/-) until the setting you want is displayed.
When the envelope stop is set as required, press Next (►) to ad-
vance to the next set
Batch Counter
The batch counter allows you to automatically process pre-defined
batches of finished mail pieces. When the batch is complete, the
machine stops automatically. Press Start to begin processing of the
next batch.
If batch counter is
not selected, the display counter simply counts
the number of items processed until you press Reset Counter.
Press Change (+/-) to switch
Batch Mode On or Off.
When the setting is correct,
press Next (►).
If the batch counter is turned on,
the machine will now request
the batch quantity. The default
quantity is 50, but you may select
any value up to 999 using the
Change (+/-) buttons.
When the setting is correct, press Next (►).