Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 30)

2 • Operation
2-14 SV61656 Rev. A
Notes about manual feed:
1. The manual feed setting allows you to run stapled sets of up
to five sheets to a maximum of 100 lbs. (400g/m 2 per set). The
maximum compressed thickness of the set after foldng must
not exceed 0.08 inches (2mm). The machine will wait for manual
insertion of each set into sheet feeder 1, after which it will fold
and insert the set automatically.
2. When running manual feed mode, sheet feeder 2 becomes inop-
erable.
When the first sheet feeder is set as required, press Next (►) to ad-
vance to the next setting…
Setting the Second/Supplementary Sheet Feeder
Select whether you want to use
the second sheet feeder.
Press
Change (+/-) until you see
the option you want:
On Double Detect
Feeder on with the double detector operating. (The double
detector stops the machine if two or more sheets feed simul-
taneously from the feeder).
On
Feeder on without the double detector.
Off
Feeder turned off for this job.
When the second sheet feeder is set as required, press Next (►) to
go to the next setting…