Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 75)

Reference • 4
4-17 SV61656 Rev. A
Machine Specifications
Physical Dimensions:
Length 30.4 in. (773mm)
Depth 22.3 in. (568mm)
Height 20.6 in. (525mm)
Weight 121 lbs. (55kg)
Noise Level (Running): 73dBA
Electrical: 120V, 60Hz, 6.0A
Speed:
Up to a maximum of 3,000 cycles per hour (depending on machine
condition, operator skill, fold type and material quality)
Fold Modes:
Single fold
C — Letter fold
Z — Accordion fold
Double fold
Compliance:
Pitney Bowes certifies that the inserting system complies
with the requirements of the Low Voltage Directive 73/23/
EEC and the EMC Directive 89/336/EEC. The product
was tested in a typical configuration.
The inserting system is UL approved (US) and CUL ap-
proved (Canada).
Service
Service for your new folding/inserting machine is available through-
out the United States and Canada.
Should you have questions about your machine, or require service or
assistance with your particular application, please refer to the contact
list at the front of this manual.
Pitney Bowes also offers a service maintenance agreement to keep
your machine in top condition at nominal cost. For further informa-
tion, call your local Pitney Bowes office. Also refer to the contact in-
formation located at the front of this manual.