Pitney Bowes DI425 FastPac Inserting Systems - Manual (Page 48)

3 • OMR
3-10 SV61656 Rev. A
Programming an OMR Job
Entering the Setup Mode
Open the hinged cover to the
right of the display. This exposes
the setup buttons.
Press
Setup. The indicator lights
and the machine asks for an ac-
cess code. This code prevents
unauthorized personnel from
changing the machine’s settings.
Use the
Change (+/-) buttons to
select the access code 71.
Press Next (►) to advance to the
next setting…
Choosing the New Job Number
The machine asks for the job
number you wish the new settings
to be stored under.
Use the
Change (+/-) buttons to
display the job number you want.
Notes:
• If you use an existing job
number, the old settings will
be overwritten by the new set-
tings you are about to make.
• If you want to find a currently
unused job number, press
Change (+/-) until you see a
job where the display shows no symbols alongside the feeders
or in the fold setup area. This means the job number is currently
unused.
Press Next (►) to advance to the next setting…