Monroe Electronics Electrostatic Fieldmeter - Static Monitor - model 177A - Manual (Page 34)

33
Section 12
Upgrading the Firmware
From time to time firmware upgrades may be available. With units version 1.03 or higher this
upgrade can be accomplished using the 177A software and obtained via download from our website,
e mail, or CD. Units that are version 1.02 require reprogramming of the processor and cannot be
upgraded via the 177A software. To check the version of your unit read the Channel 2 display at
power up. Note: For the duration of the firmware upgrade (approximately 6 minutes) the instrument
is not functional and the system is not monitoring. If you have any questions regarding firmware
upgrades please contact Monroe Electronics.
To initiate firmware upgrade, click on Update Firmware in the Program Setup drop-down menu. The
following window will appear:
Diagram 1
Clicking on Yes will present the following window:
Clicking on OK will present the following window:
Diagram 2