Monroe Electronics Electrostatic Fieldmeter - Static Monitor - model 177A - Manual (Page 76)

APNE-0016 75
IX. III References
[1] Crowley, J.M., Fundamentals of Applied Electrostatics, Wiley-Interscience, New
York (1985)
[2] Seaver, A.E., “Analysis of Electrostatic Measurements on Non-Conducting
Webs”, J. Electrostatics, Vol. 35, Elsevier, New York (1995)
[3] Application Note APNE-0003, “Fieldmeter Measurement Techniques Using
Monroe Electronics Model 1036 Probes”, http://www.monroe-electronics.com/.
[4] Taylor, D.M. and Secker, P.E., Industrial Electrostatics: Fundamentals and
measurements, Research Studies Press, John Wiley (1994)
[5] Maurer, B., Glor, M., Luttgens, G. and Post, L., “Hazards Associated with
Propagating Brush Discharges on Flexible Intermediate Bulk Containers,
Compounds and Coated Materials”, Electrostatics '87, Inst Phys Confr Series No.
85, London (1987)
[6] Vosteen, W.E., Monroe Electronics, Inc., “A Review of Current Electrostatic
Measurement Techniques and Their Limitations” presented at the Electrical
Overstress Exposition, April 24-26, 1984
[7] TANTEC Static Elimination Guidebook, A Guidebook On Using Electrostatics For
the Elimination of Static Charges on Industrial Surfaces, Schaumburg, IL (1998)
[8] Seaver, A.E., “Moving Ground Plane Electrostatic Fieldmeter Measurements”, J.
Electrostatics, Vol. 42, Elsevier, New York (1997)
[9] Haase, H., Electrostatic Hazards: Their Evaluation and Control, Verlag Chemie,
New York (1977)
[10] Horváth, T. and Berta, I., Static Elimination, Research Studies Press,
Chichester (1982).