Monroe Electronics Electrostatic Fieldmeter - Static Monitor - model 177A User Manual
Page 35
34
The source file may be on a CD or downloaded from the Internet. If not available via our web site
please contact Monroe Electronics to obtain to receive firmware updates. Upon selecting the
appropriate upgrade file the instrument will “check” the update file and display the following if it is
O.K. for use. Or, if the file is not ok, “Invalid file format. File not loaded” will be displayed.
Diagram 3
Click on Yes to begin the download.
Diagram 4
If the unit is powered up in Load Program mode (caused by a previously incomplete loading process
due to power or user interruption) and Update Firmware is selected on the Main screen drop-down
menu the following window will be displayed:
Diagram 5
If your connections are good and power is supplied to the unit click on Yes and proceed to open the
source file (Diagram 2.)
During the download, if the chip is bad (doesn’t accept data), show:
"The program chip is defective."
"Please contact the manufacturer for replacement."
When the upgrade is completed successfully “Firmware Upgrade Success!” will be displayed: