Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 11)

Getting Started 1-3
U n p a c ki n g t h e P r i n t e r
After you unpack the printer, you should have the printer, a power cord, and
a ribbon take-up core (may already be on take-up reel). Keep the box and
packaging material in case the printer ever needs repair.
Shipping the Printer
If you need to ship the printer to a different location:
1. Remove the ribbon roll, if one is loaded.
2. Remove the supply roll, if one is loaded.
3. Close the printhead by pressing down on the thumb well until you hear it
click into place.
4. Place the printer in the original box and secure with packaging material.
Make sure the printer is adequately packed to avoid damage during
shipment. See Appendix B, "Accessories & Options" for the packaging
materials part numbers.
Thum b W el l