Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 90)

8-2 Operator's Handbook
Note: If the printer will be unused for extended periods of time, we
recommend leaving the printhead unlatched.
An optional keyboard is also available to enter offline batch data. The
keyboard must be purchased separately. If there are offline batches in the
print queue, the offline batches print after the downloaded batches have
printed.
O n - D e m an d M o d e P r i n t i n g
When this printer is operating in the on-demand mode, the next label prints
when the previous label is removed from the printer or when Feed/Cut is
pressed. The display shows "Printing X of Y" until all the labels in the batch
are printed.
If you have purchased the optional peel module, you must use on-demand
printing with peel mode. If you are using peel mode, remove the excess
backing paper by pulling up across the saw-toothed tear edge. Make sure
the backing paper tears at the edge. Hold the leading edge of peeled labels
when printing on stock longer than six inches. The minimum feed length for
peel mode is 1.5 inches. You must use non-perforated supplies for peel
mode. The maximum speed for peel mode is 8.0 ips.
Note: We recommend using 0.5-inch gap supplies in peel mode when
backfeed is disabled.
Printing an Error Label
If the printer displays a data error (errors
0-499), press Feed to print an error label
and continue printing. See your System
Administrator about the error label.