Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 123)

Accessories & Options B-3
Ethernet Information
We offer internal and external Ethernet connectivity solutions. These
solutions make it easy to set up, manage, and monitor a printer linked to an
Ethernet connection. The print server provides multiprotocol capabilities for
users with W indows® 95/98/2000 or W indows NT®, TCP/IP, and NetW are®.
Software is available on our W eb site to configure the print server. It can
also be configured using HP Jet Admin™ or HP W eb JetAdmin™ software.
Configuration information prints automatically if the Ethernet print server
senses a hardware error. To print configuration information on demand,
press the Test button on the side of the external Ethernet print server unit or
use the configuration utility provided for your network operating system. The
configuration label prints in MPCL format.
Note: The configuration label is best displayed using 4" wide by 6" long
labels. If the label is too small, some information may print outside
the label edges.
RF Informa tion
We offer the 7411 Print Server that communicates with printers on an
802.11b wireless network. You can use the print server in ad-hoc (peer-to-
peer) or infrastructure (access point) wireless mode. In addition, the
wireless print server includes a unique dual-mode built-in wired Ethernet
connection. You can switch between wired and wireless mode without any
loss of data.