Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 38)

4-4 Operator's Handbook
S e t t i n g t h e Ri b b o n
You have to tell the printer if your supplies require a ribbon. To change the
setting, from the Main Menu, select Setup, then Supply. Then, follow these
steps.
1. Press  or  until you see
SUPPLY
Ribbon 
2. Press Enter/Pause to set the ribbon option. The current setting is
displayed, for example:
RIBBON
 Yes 
3. Press  or  to see the other options. After you display the option you
want, press Enter/Pause. Press Escape/Clear until you see the Main
Menu.
Note: If you set the Ribbon option to Yes, install a ribbon before printing.
If you want to use a high energy ribbon, select high energy for the
ribbon.