Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 95)

Printing 8-7
S p e c i al P r i n t i n g Co n si d e r a t i o n s
Keep in mind the following special printing considerations.
M aximum
Print Speed Printing M ethod Printhead
Density Knife Peel M ode
2.5/4.0/6.0
ips (inches
per second) Therm al Direct
Therm al Transfer 203/300 dpi
dots per inch Supported Supported
8.0 ips Therm al Direct
Therm al Transfer 203/300 dpi Not
Supported Supported
10.0 ips Therm al
Direct/Therm al
Transfer 203 dpi only Not
Supported Not Supported
12.0* ips Therm al
Direct/Therm al
Transfer 203 dpi only Not
Supported Not Supported
*12.0 ips is the high speed option, which must be purchased separately.
♦ The minimum label feed length is 0.75 inches (19 mm) using 8.0 ips or
higher.
♦ 94x5 emulation is not supported using 300 dpi.
♦ The maximum supply and image length with the optional 300 dpi
printhead is 12.0 inches (305 mm).
♦ You may need to clean the printhead and platen roller more frequently
when printing at high speeds. See Chapter 9, "Care & Maintenance," for
more information.