Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 59)

Setting Communications 5-3
S e t t i n g t h e S t o p Bi t s
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press  or  until you see
SERIAL COMM
 Stopbits 
2. Press Enter/Pause. The current setting is displayed, for example:
STOPBITS
1 
3. Press  or  to display the number of stop bits you need, then press
Enter/Pause. Press Escape/Clear until you see the Main Menu.
S e t t i n g t h e P a ri t y
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press  or  until you see
SERIAL COMM
 Parity 
2. Press Enter/Pause. The current setting is displayed, for example:
PARIT Y
None 
3. Press  or  to display the parity you need, then press Enter/Pause.
Press Escape/Clear until you see the Main Menu.