Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 58)

5-2 Operator's Handbook
S e t t i n g t h e B au d R a t e
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. If password protection in enabled, press Feed/Cut three
times, then press Enter/Pause before you see the Setup Menu options.
Then, follow these steps.
1. Press  or  until you see
SERIAL COMM
Baud Rate 
2. Press Enter/Pause. The current setting is displayed, for example:
BAUD RATE
 9600 
Press  or  to display the baud rate you need, then press Enter/Pause.
Press Escape/Clear until you see the Main Menu.
S e t t i n g t h e W o rd L e n g t h
To change the setting, from the Main Menu select Setup, Port Settings, then
Serial Comm. Then, follow these steps.
1. Press  or  until you see
SERIAL COMM
 W ord Length 
2. Press Enter/Pause. The current setting is displayed, for example:
W ORD LENGTH
 8
3. Press  or  to display the word length you need, then press
Enter/Pause. Press Escape/Clear until you see the Main Menu.