Avery Dennison Monarch 9855 Operator Handbook - Manual (Page 26)

2-10 Operator's Handbook
U s i n g S t r i n g T ag S u p p l y
String tags are used in a variety of applications, such as jewelry tags and
item marking.
String Ta g Considerations
♦ Thermal direct printing, fan-fold supplies, and the knife are not supported
with string tags.
♦ The maximum print speed with string tags is 6.0 inches per second (ips).
♦ A non-print zone of 0.250 inches (6.4 mm) exists on the string side of the
tag.
♦ Use the wide setting for string tags.
Make sure the printer is configured for the correct supply type.
1. Open the cover.
2. Unlock the printhead by turning the retaining latch.
3. Lift printhead assembly using the printhead tab until the assembly locks
into place.
4. Shake the roll of string tags down to untangle the roll.