Ied section – Basler Electric BE1-11 IEC 61850 Protocol User Manual
Page 18
12
9424200892 Rev F
•
the access points per IED to the sub networks
•
the address
•
the IP address of the LAN network is an exception also part of the address elements
•
extended during signal engineering and routing, the link to the GoCB message in transmission
direction
Figure 10 shows the IEC 61850-6: Communication Network.
Figure 10. IEC 61850-6: Communication Network
IED Section
The IED section describes the complete IED as it is needed for IEC 61850 communication. The Data
Type Template part of an IED may be seen as part of the IED, even when separated in its own section.
The IED’s ICD file includes the description of the LNs, their Data Type Templates, and the
used/supported services. The structure of the IED section follows the definitions made in the IEC 61850
standard.
Figure 11 illustrates organization of LDs, LNs, DOs, and DAs in an IED.
IED (client)
- Access Point (AP)
- Address
- GSE: GoCBs
IED (server)
IED (client)
- Access Point (AP)
- Address
- GSE: GoCBs
IED (server)
IED (client)
- Access Point (AP)
- Address
- GSE: GoCBs
IED (server)
IED (client)
- Access Point (AP)
- Address
- GSE: GoCBs
IED (server)
IED (client)
- Access Point (AP)
- Address
- GSE: GoCBs
IED (server)
Subnetwork
AP
AP
P
0
0
6
1
-6
5
IEC 61850 Engineering
BE1-11