Basler Electric BE1-11 IEC 61850 Protocol - Manual (Page 36)

30 9424200892 Rev F
Step 6: Right-click on the BE1_11_1 file in the Workspace and select Validate. The round indicator
located on the left side of the file name changes from yellow to green if validation is successful.
Step 7: Repeat Steps 1 through 5 to configure DataSet02 using a different FCDA in Step 3.
Step 8: Repeat Steps 1 through 7 to configure the DataSets for the BE1_11_2 CID file.
Figure 27. Datasets Tab
Figure 28. Add New Dataset Screen
BEST61850™ BE1-11