MBM Corporation 352S - Manual (Page 12)

Operator's Manual multipli 35 General
14 Mathias Bäuerle GmbH
6. COMPONENTS OF THE MACHINE
As a result of its modular design, the multipli 35 series offers a wide range of applications and
configurations to suit the requirements of the user.
The following components are available:
- Friction feeder F35
- Air feeder without register table - S32
- Air feeder with register table - PBA 35
- First fold unit with 2 fold plates
- First fold unit with 4 fold plates
- Second fold unit with 2 fold plates and roller table
- Second fold unit with 4 fold plates and roller table
- Fanned delivery
- Mobile stands
The model number shows the machine configuration, for example:
multipli 35/ 2 F
35 Infeed width 35 cm
2 1st buckle fold unit with 2 fold plates
F Friction feeder F35
multipli 35/ 4 S
35 Infeed width 35 cm
4 1st fold unit with 4 fold plates
S Air feeder without register table S32
multipli 35/ 4 /2 PBA
35 Infeed width 35 cm
4 1st fold unit with 4 fold plates
2 2nd fold unit with 2 fold plates
PBA Air feeder with register table PBA 35
The following machine configurations are possible in the multipli 35 folder line:
• Machines with friction feeder F35: multipli 35/2 F
multipli 35/2/2 F
multipli 35/2/4 F
• Machines with air feeder S32 multipli 35/2 S multipli 35/2/4 S
without register table: multipli 35/4 S multipli 35/4/2 S
multipli 35/2/2 S multipli 35/4/4 S
• Machines with air feeder PBA multipli 35/2 PBA multipli 35/2/4 PBA
with register table: multipli 35/4 PBA multipli 35/4/2 PBA
multipli 35/2/2 PBA multipli 35/4/4 PBA