MBM Corporation 352S - Manual (Page 62)

Operator's Manual multipli 35 Counters
Mathias Bäuerle GmbH 67
Sheet Gap Control
The operating mode "sheet gap control" makes continuous sheet feeding possible in
a predetermined rhythm. This allows to select a variable sheet gap.
The function of the sheet gap control can be switched on or off by pressing key .
Switching On the
Sheet Gap Control
Key: Explanation:
The green LED indicates that the sheet gap set-up feature is turned on.
The analog display under the total
counter comes on.
Setting the Sheet
Gap Key: Explanation:
Press the key several times - the number of flashing LEDs in the analog
display corresponds to a certain sheet gap.
Small sheet gap:
Only a few LEDs are on.
Large sheet gap:
Most LEDs are on.
The sheet gap can be changed with the machine running.
Speed Display
The current speed can be displayed with the machine running by pressing key .
The speed in sheets per hour appears in the 6-digit display while the key is pressed.
Paper Travel Control
The paper travel control can be switched on or off by pressing key
ON: LED is on OFF: LED is off
The paper travel control is only active in the "pulsed" feed mode.
In case of a paper jam, paper travel is interrupted and the green LED in the key
is flashing.
Press key after clearing the jam.
The LED comes on again and paper feed can be resumed.