MBM Corporation 352S - Manual (Page 14)

Through the rotation of the infeed roller (1)
the uppermost sheet of the fanned paper stack
is transported in direction of the feed roller (2).
When the sheet reaches the feed roller (2), it is gripped by the roller and the rotating
movement moves the sheet on to the first pair of rollers (4) where the actual fold
occurs.
As soon as the trailing edge of the sheet has left the feed roller, the infeed roller grips
the next sheet from the top and again transports it in direction of the feed roller.
Operator's Manual multipli 35 Friction Feeder F35
Mathias Bäuerle GmbH 17
9. FRICTION FEEDER F 35
Function The friction feeder F35 is especially suitable for separating uncoated and recycled
papers.
When handling coated paper such as art- or vellum papers, markings may occur which
could impair the quality.
Sheet separation is done by friction from the top of a fanned paper stack.
The feeder is driven by the feed roller (2), which in turn moves the infeed roller (1).
The pressure roller (3) under the feed roller is stationary.
1
2
3
4
4
Description
5
6
7
8
9
10
11
5 Feed table
6 Feed guide left and right
7 Knurled nut for adjusting the
feed guide
8 Guide holes
9 Feeder
10 Knurled nut for changing the
contact pressure on the feeder
11 Infeed roller