MBM Corporation 352S - Manual (Page 23)

Operator's Manual multipli 35 Air Feeder S 32
26 Mathias Bäuerle GmbH
Setting the vacuum:
For setting the vacuum, the machine must be turned on.
!
Exercise caution in the vicinity of rotating shafts and rollers!
Hair, loose garments and jewellery may get caught!
SERIOUS INJURY MAY RESULT!
!
Do not get close to rotating shafts and rollers while the machine is
running and the noise-absorbing cover is open!
SERIOUS INJURY MAY RESULT!
!
Exercise caution in the vicinity of the perforating- and slitting knives!
They have sharp edges for proper function!
SERIOUS INJURY MAY RESULT!
• Open the bleeder hole for setting the minimum effect.
• Start the machine.
• Slowly slide the collar over the bleeder hole.
Observe sheet separation while doing this.
At first no sheets are pulled off the stack or they are pulled
off irregularily.
The more the collar covers the bleeder hole, the smoother
the paper transport.
Leave the collar in the position where even separation is obtained.
Make sure that much vacuum does not cause feeding of double sheets.
• Switch off the machine.