MBM Corporation 352S - Manual (Page 54)

Operator's Manual multipli 35 Counters
Mathias Bäuerle GmbH 59
18. TOTAL COUNTER
An optional total counter (1) is available for folder models multipli 35 F, 35 S and
35 PBA. Retrofitting at a later date is also possible.
The total counter permanently displays the number
of folded sheets. It cannot be switched off.
The display consists of 6 digits (2).
The number shown can be reset by pressing
the reset button (3).
2
3
MATHIAS BÄUERLE
multipli
35
1
19. BATCH COUNTER
Folder model multipli 35 PBA can also be equipped with an optional batch counter.
The purpose of this type of counter is to mark a pre-settable number of sheets (batch)
by creating a gap in the fanned delivery, thus making it possible to separate the
individual batches.
When removing the folded sheets from the delivery table, the batches will contain the
same number of sheets.
Machines with a batch counter are equipped with a special operator panel (4) where
the following functions can be set:
- Batch count
- Total count (resettable)
- Permanent count (non-resettable)
- Speed display
- Pulsed feed control
- Sheet gap control
- Paper travel control (at this time for the first
fold unit only)
- Streamfeed
- Double sheet detection
Two photodetectors are positioned on the register table:
-
Photodetector for sheet gap control (5)
- Photodetector for double sheet detection (6)
4
5
6