MBM Corporation 352S - Manual (Page 42)

Operator's Manual multipli 35 Fanned Delivery
Mathias Bäuerle GmbH 45
13. STANDARD FANNED DELIVERY
Description Components and operating elements:
1 Transport belt
2 Hold-down rollers
3 Knurled screw for hold-down rollers
4 Stacker plate
5 Knurled screws for adjusting the
tension of the transport belts
Adjusting the Hold-
Down Rollers The hold-down rollers are needed for achieving a clean fanned delivery.
They prevent the folded sheets from opening up on the delivery belt.
• Loosen the knurled screw (6) by
turning it counter-clockwise.
• Shift the hold-down rollers in such a
way that the distance (7) between
delivery shafts and hold-down rollers
corresponds to the final size of the
folded sheet.
• Tighten the knurled screw by turning
it clockwise.
• Shift the hold-down rollers sideways so that they are running about 5 cm from
the left and right edges of the sheets.
6
7
1
2
3
5
4
5