MBM Corporation 352S - Manual (Page 3)

Operator's Manual multipli 35
4 Mathias Bäuerle GmbH
13. Standard Fanned Delivery 45
14. Fanned Delivery A 35 46
15. Operation and Trial Folds 49
multipli 35 F (Friction Feeder) 49
multipli 35 S / multipli 35 PBA (without Operator Panel) 50
multipli 35 PBA (with Operator Panel) 51
16. Fine Adjustments and Corrections 52
Fold Length 52
Skewed Folds 52
Correction of Skewed Folds 53
Out-of-Square Paper 53
17. Perforating-, Scoring- and Slitting Tools 55
Perforating 56
Scoring 57
Slitting 57
Installation of the Tools 58
18. Total Counter 59
19. Batch Counter 59
Description 60
Operating Modes 62
Continuous Suction / Streamfeed 62
Control of Sheet Gap 63
Total Counter 64
Permanent Counter 64
Setting the Batch Count 65
Switching on the Batch Counter 65
Setting the Desired Number of Sheets 65
Setting the Interval Time 65
Batch Counting for Two-up and Three-up 66
Sheet Gap Control 67
Switching on the Sheet Gap Control 67
Setting the Sheet Gap 67
Speed Display 67
Paper Travel Control 67
20. Double Sheet Detection 68
21. Trouble Shooting Guide 71
The title, copyright and all other proprietary rights in this document are vested
in Mathias Bäuerle GmbH and no part of it may be reproduced in any form
without the written permission of Mathias Bäuerle GmbH.