MBM Corporation 352S - Manual (Page 64)

Operator's Manual multipli 35 Double Sheet Detection
Mathias Bäuerle GmbH 69
Setting Check • Fold a sample sheet once by hand.
• Slide the folded sheet under the photodetector.
LED display:
the two red LEDs are on
the yellow LED is on
• Remove the paper.
• Press key C.
LED display:
the red LED goes out
the green LED is on
• Slide an unfolded sheet under the photodetector.
LED display:
the green LED is on
Display of Double
Sheets When the sheets pass under the photodetector, the red and yellow LED may
come on briefly. This is normal and does not indicate a double sheet.
• When a double sheet is detected while the machine is running, the machine stops
immediately.
LED display:
red LED is on
green LED is on
If the paper travel control was activated, the green LED in this key may
also come on.
• Remove the double sheet.
• Press key C.
LED display:
red LED goes out
green LED is on
• Press the paper travel control key when this LED is still flashing.
Register belt and feeder start to work and transport the sheets which are still
in the machine to the delivery section.
Re-start feeding by pressing this key .