Pacific Research Solutions RI-200 User Manual
Page 3
Pacific Research Solutions
RI-200 User Manual
Page 2
4.5
System Commands
4.5.00
No Operation
4.5.01
System Mode
4.5.02
Receiver Audio Source Mode
4.5.03
Reserved
4.5.04
Repeater Carrier Delay Timer
4.5.05
Force PTT On
4.5.06
Repeater Telemetry Mode
4.5.07
ID Interval Timer
4.5.08
Courtesy Message Timer
4.5.09
LED Status Display
4.5.10
Repeater Timeout Timer
4.5.11
Reserved
4.5.12
Adjust Repeater Transmitter Audio Level
4.5.13
Reserved
4.5.14
User and S-Command CTCSS/DCS Tone Panel Enable
4.5.15
Macro Command Decode Enable
4.5.16
DTMF Inter-Digit Time
4.5.17
DTMF Mute Delay Time
4.5.18
DTMF Mute Control
4.5.19
Send DTMF Tones on Repeater Transmitter
4.5.20
Tone Panel CTCSS Tone and DCS Code Decode Enable
4.5.21
Set Master and Cross Encode CTCSS Tone or DCS Code
4.5.22
Tone Panel CTCSS Tone or DCS Code Encode Mode
4.5.23
Controller Function CTCSS Tone or DCS Code Encode
4.5.24
Set CTCSS/DCS Encode Level
4.5.25
DCS TX/RX Data Polarity Control
4.5.26
Reserved
4.5.27
Reserved
4.5.28
Reserved
4.5.29
Reserved
4.5.30
Reserved
4.5.31
Message Editor, Insert Tone Generator CW Commands
4.5.32
Set Message and Event Triggers
4.5.33
Reserved
4.5.34
Auxiliary Output Mode
4.5.35
Auxiliary Input Mode
4.5.36
Auxiliary Input Carrier Delay Timer
4.5.37
Regenerate DTMF Tones From the Auxiliary Input
4.5.38
Multiple Controller Data Protocol and Cloning Mode
4.5.39
RI-200 Controller Unit Address
4.5.40
Delay Timer Macro Trigger
4.5.41
Receiver Inactivity Timer Macro Trigger
4.5.42
Regular Interval Macro Trigger
4.5.43
Set Clock Time
4.5.44
Scheduler to Trigger a Macro
4.5.45
Logic Inputs and Internal Functions – State Change Trigger
4.5.46
Digital Logic Output On/Off
4.5.47
Digital Logic Output Pulse On for X Time
4.5.48
Reserved
4.5.49
Dial Click Control Trigger
4.5.50
Adjust Squelch
4.5.51
Set Squelch Mode
4.5.52
Detail Squelch Setup
4.5.53
Reserved