ROTEL RDV-1060 - Manual (Page 17)

17 English
STOP Button
Press the STOP button to stop disc playback.
PAUSE Button
Press the PAUSE button to temporarily sus-
pend play or to advance the still picture frame
by frame when playback is paused.
TRACK Buttons
The TRACK buttons skip forward or
back to the beginning of the next selection.
SEARCH Buttons
Press the SEARCH buttons to begin
variable high-speed play, either forward or
reverse, at 2X, 4X, 6X, or 8X normal speed.
Remote Control
The RDV-1060 is supplied with an RR-DV94
remote control that duplicates the front-panel
functions and provides additional features.
When a function is available on both the front-
panel and the remote, a number (referring to
the front-panel illustration) and a letter (refer-
ring to the remote illustration) are shown in
the instructions. When only one identifier ap-
pears, that control is available only on the front-
panel or the remote, but not both.
Remote Control Batteries
Two R03(LR03)/AAA size batteries (supplied)
must be installed before the remote control can
be used. Remove the cover on the back of the
RR-DV94. Install the batteries as shown in the
illustration in the battery well, then replace the
cover.
NOTE
: Remove the batteries from the remote
if it will not be used for a long period of time.
Do not leave run down batteries in the re-
mote control; they can leak corrosive chemi-
cals which will damage the unit.
Using the Remote
To use the remote, aim it at the remote sensor
on the front-panel of the RDV-1060. The op-
eration of the remote sensor can be affected
if it is blocked or exposed to bright infrared
light (such as sunlight or certain types of halogen
lights). In addition remote control functions may
not work reliably if the batteries in the RR-DV94
are weak.
ON/OFF Buttons
These two buttons provide discrete ON/OFF
functions. Press the ON button to activate the
RDV-1060 and the OFF button to put the unit
in standby mode.
NOTE
: The front panel master power button
must be pressed in for the remote ON/OFF
buttons to work.
OPN/CLOSE Button
Pressing this button opens or closes the Disc
Drawer. If in standby mode, pressing the button
activates the unit.
PLAY/ENTER Button
Press the PLAY/ENTER button to start play-
ing the disc from the beginning or to resume
play if playback is paused or to return to normal
play from any of the slow motion or fast play
modes. If in standby mode, pressing the but-
ton activates the unit.
STOP Button
Press the STOP button to stop a disc that is
playing. If playback is restarted after one press
of the STOP button, the disc will resume play-
ing from the current position on the disc. Press
the STOP button twice to cancel the resume
feature. Subsequent play will restart from the
beginning of the disc.
Playback will also stop when the DVD POWER
button on the remote is pressed.
PAUSE Button
Press the PAUSE button to temporarily sus-
pend play or to advance the still picture frame
by frame after playback is paused.
TRACK Buttons
The TRACK buttons skip forward/
back to the beginning of the next selection.
SEARCH Buttons
Press the SEARCH buttons to begin
variable high-speed play, either forward or
reverse, at 2X, 4X, 6X, or 8X normal speed.
These buttons are also used for the zoom fea-
ture when displaying JPEG still images.
SLOW Button
Press this button to select slow motion play,
either forward or reverse, at 1/2, 1/4, or 1/8
normal speed.
The SLOW button is also used to view still
pictures on a DVD-Audio disc. Each press of
the button advances to the next picture.
DISP Button
The DISPLAY button changes the time shown
in the front panel display and shows a time
display in the On-Screen Display. Several
options are available including elapsed time
and remaining time of individual
Chapters/
Tracks or entire Disc/Titles.
ANGLE Button
Press the ANGLE button to select an alternate
angle view (if available for the current scene).
NOTE : A hand icon on screen indicates that this
feature is not available for the current scene.
SBTLE Button
Press the SUBTITLE button to select a subtitle
language (if available on the disc).
NOTE
: A hand icon on screen indicates that
this feature is not available on the current disc.
AUDIO Button
Press the AUDIO button to select alternate audio
tracks (if available on the disc).
NOTE : A hand icon on screen indicates that
this feature is not available on the current disc.