Seaward 350 PrimeTest - Manual (Page 26)

PrimeTest 350 Operating Instructions
- 25 -
6.2 Upload from PC
Select the Upload from PC option from the Data
Transfer menu. The PrimeTest 350 will now attempt to
establish a Bluetooth connection to the PC as
previously described in 6.1 Download to PC. The
PrimeTest 350 is now ready to receive upload data
from a PC.
6.3 Send/Receive Config Data
This feature can be used to transfer Site, Location,
User and Comments lists to/from a PC. It can be used
to configure individual PrimeTest 350 units with
identical Site, Location, User and Comments lists.
6.3.1 Send Config Data
To Send configuration data from a PC, press Menu
(F4), select Data Transfer using the arrow keys, select
Send/Receive Config Data and press OK (F4).
The PrimeTest 350 will now attempt to connect to the
Bluetooth Favourite PC. When a connection has
been established the display will be as shown below.
Open the DataTransfer.exe application on your PC
and check that the Com Port for the Bluetooth serial
port (provided by the Bluetooth USB adapter) is
selected. The baud rate will default to the correct value
of 57600.