Seaward 350 PrimeTest - Manual (Page 45)

PrimeTest 350 Operating Instructions
- 44 -
New Test will auto save at the end of a test sequence
and then open the Asset Details window ready for a
new test.
Download will auto save at the end of a test sequence
and then open the Download to PC window. When the
Download to PC window is closed the tester will
proceed to the next test and open the Asset Details
window.
Print Label will auto save at the end of a test
sequence and then open the Print Label window.
When printing is complete, the tester will proceed to
the next test and open the Asset Details window.
Options Menu will auto save at the end of a test
sequence and then open the Test Details window.
Pressing New Test (F2) will proceed to the Asset
Details window, ready for a new test. Pressing
Options (F3) will open a list of options including View
Results, Information, Print Label, Print Result, and
Write RFID Tag.
10.1.5 Sub Lkg Factor
- can be set to 0%, 6% or 10%. This is equivalent to a
Substitute Leakage reading at 230, 244 or 253 volts.