Seaward 350 PrimeTest - Manual (Page 30)

PrimeTest 350 Operating Instructions
- 29 -
7 View Saved Data
This function allows saved data to be reviewed and
transferred to PC or Pass/Fail Label. From the main
menu select View Saved Data and press OK (F4) to
accept.
The display will now show a list of previously saved
results as shown below.
7.1 Search
The Search (F1) function is used to search through
saved data. The search filter is shown below.
Saved data can be filtered by Asset ID, Site, Location
or Test Status. Wildcards will return all records. In the
example above, the search will return results for all
Asset ID from all Sites, all Locations and all Test
Status.
Note: Filtered search can be used to selectively