Seaward 350 PrimeTest - Manual (Page 46)

PrimeTest 350 Operating Instructions
- 45 -
10.1.6 Earth Result
- can be set to “Worst” or “Last”. If set to “Worst” then
the result of an Earth continuity test will be taken as the
highest reading during the test. If set to “Last” then the
result will the last reading taken.
10.1.7 Comments
Press F3 to switch to the Comments screen.
- can be set to open the comment window: always, if
the result is a pass, if the result is a fail or never.
10.1.8 Comments Line
- allows the field descriptor for each of the four
comment lines to be changed to show Notes, Asset
Description, Asset Group, Make, Model or Serial
Number as required.