Seaward 350 PrimeTest User Manual
Page 78
PrimeTest 350 Operating
Instructions
- 77 -
13.3 Entering Location Information
Move the cursor to the Location field.
A Location can be selected in the same way as a Site,
using Quick Text to choose from the list previously
stored in memory or a new Location can be entered
using the keypad.
Note: If the LEFT/RIGHT arrows are pressed before
entering a character from the keypad, the full
Location list will be opened.
13.3.1 Selecting Location using Quick Text
Enter the first letter of the required Location name
using the keypad. If the Location name is currently in
memory it will be displayed in a list of available
Locations. The example below shows the display if
the “S” key is pressed on a PrimeTest 350 that has
been pre-configured with a list of Locations.