Seaward 350 PrimeTest - Manual (Page 62)

PrimeTest 350 Operating Instructions
- 61 -
12 Bluetooth Functions
The PrimeTest 350 has built in Bluetooth connectivity.
It is possible to connect a variety of devices to the
PrimeTest 350 via the Bluetooth link:
PC – required to download stored data, to upload
Test’n’Tag logos, to upload configuration, test and
program data.
Barcode Scanner – required for scanning asset labels
Printers – required for printing pass/fail labels and
barcode labels.
RFID Wand – required for reading from and writing to
RFID tags.
The PrimeTest 350 will automatically search for the
appropriate accessory or device when function
requiring a connection is performed.
Note: When attempting to print a pass/fail label the
PrimeTest 350 will automatically connect to
the printer assigned in the Bluetooth
Favourites.
Similarly, when data is required from a
barcode scanner, the PrimeTest 350 will
automatically connect to the barcode
scanner assigned in the Bluetooth
Favourites.
12.1 Bluetooth USB Adapter
The PrimeTest 350 can be supplied with a Bluetooth
USB Adapter. This device can be used to add
Bluetooth connectivity to a PC or Laptop which is not
already Bluetooth enabled. Full installation instructions
are provided in the Bluetooth USB Adapter Setup
guide.