Seaward 350 PrimeTest - Manual (Page 86)

PrimeTest 350 Operating Instructions
- 85 -
If the Earth Continuity test results in a Fail and the On
Test Failure is set to End Test the sequence is
terminated.
Note: On Test Failure is set in User Options – Test
Options – On Test Failure.
If the Earth Continuity test results in a Fail and the On
Test Failure is set to Fail Menu the display is as
shown below.
The earth continuity test can be restarted by simply
pressing OK (F4) to select Restart Test.
The next test in the sequence for 230V Hand Held or
Portable Class I is an insulation resistance test. The
display is as shown below.