Seaward 350 PrimeTest - Manual (Page 50)

PrimeTest 350 Operating Instructions
- 49 -
Press OK (F4) to accept the new user name.
This new user will have no password set as default. If a
password is required see section 10.4 – Change
Password. Press OK (F4) to finish.
Note: If a User has been set up along with a
password this password must be entered in
the Password field of the Change User
screen. The unit will not allow this User to be
selected if the password is incorrect.
As the active User has been changed from Admin,
access to the configuration menus has been removed.
When logged in as any other User access is restricted,
as can be seen below, where the unavailable
configuration options have a line through them.