H3C Technologies H3C SR8800 - Manual (Page 65)

55
Hardware management
This chapter describes the hardware management functions that the router provides. With these functions,
you can conveniently view the operating status of your router, and manage and routinely maintain the
hardware modules of your router.
NOTE:
The output depends on your router model.
Displaying the electrical label data for your router
Electrical label data is also called permanent configuration data or archive information, which is written
to the storage component of a card during device debugging or testing. The information includes name
of the card, card serial number, and vendor name.
Use the display device manuinfo command to display the electronic label data for your router, including
the card name, serial number, MAC address, manufacturing date, and vendor name.
# Display the electrical label data for the card in slot 3 on your router.
<Sysname> display device manuinfo slot 3
Slot 3:
DEVICE_NAME : SPC-1010-II
DEVICE_SERIAL_NUMBER : 210231A0E50103000002
MAC_ADDRESS : 000f-e200-5600
MANUFACTURING_DATE : 2011-02-28
VENDOR_NAME : H3C
Slot 3 Subslot 1:
DEVICE_NAME : PIC-TCP8L
DEVICE_SERIAL_NUMBER : 210231A85JH105000015
MAC_ADDRESS : NONE
MANUFACTURING_DATE : 2010-05-24
VENDOR_NAME : H3C
Displaying the card information
Use the display device command to display card information for your router, including the slot number,
card type, card status, and software version.
# Display the summary information of all cards on your router.
<Sysname> display device
Slot No. Brd Type Brd Status Software Version
0 SR02SRP1E3 Master SR8800-CMW520-R3331
1 NONE Absent NONE
2 NONE Absent NONE
3 SPE-1010-II Normal SR8800-CMW520-R3331