H3C Technologies H3C SecPath M9000 Series - Manual (Page 14)

6
Space
For easy maintenance, follow these guidelines:
• The equipment room is at least 3 m (9.84 ft) high.
• Reserve at least 1 m (3.28 ft) of clearance between the rack and walls or other devices.
• The dimensions of the rack are sufficient for the chassis. For more information about chassis
specifications, see "Appendix A Chassis views and technical specifications."
Tools and equipment
Table 5 lists the tools and equipment that you might use during installation, and all of them are user
supplied. Prepare them before installation.
Table 5 Tools and equipment list
Category Tool
Measuring and
marking tools
Long tape, ruler (of 1 meter, or 3.28 ft), gradienter, marker, chalk line, and pencil
Drills Percussion drill, electric drill, and several auxiliary drill bits
Fastening tools
• Flat-blade screwdriver P4-75 mm
• Phillips screwdriver P1-100 mm, P2-150 mm, and P3-250 mm
• Socket wrench M5
• Socket wrench M6
Small tools
Needle-nose pliers, diagonal pliers, combination pliers, wire-stripping pliers, crimping
pliers, RJ-45 crimping pliers, file, and handsaw
Auxiliary tools
ESD wrist strap, hair brush, tweezers, paper knife, hand bellows, electric iron, solder wire,
ladder, cable stripper, vacuum cleaner, crowbar, and rubber hammer
Tools for
fiber-optic
cleaning
Lint-free paper and optical fiber microscope
Equipment
Multimeter, 500 V Megohmmeter for measuring the insulation resistance, error detector,
optical power meter, and earth resistance tester