H3C Technologies H3C SecPath M9000 Series - Manual (Page 39)

31
Step Command Remarks
Associate an ACL with the NAT address group
on the interface:
• No-PAT
nat outbound [ acl-number ] address-group
group-number [ vpn-instance
vpn-instance-name ] no-pat [ reversible ]
• PAT
nat outbound [ acl-number ] [ address-group
group-number ] [ vpn-instance
vpn-instance-name ] [ port-preserved ]
Available in interface view.
7. Add the interface to
the security zone.
• security-zone name zone-name
• import interface interface-type
interface-number [ vlan vlan-list ]
Available in security zone
view.
8. Return to the
upper-level view.
quit Available in any view.
9. Save the running
configuration.
save [ safely ] Available in any view.
NOTE:
The command outputs vary with the gateway's software version.
Verifying the network configuration
To verify the device information, software version, operating status, and network configuration of the
gateway, perform display commands in any view.
Task Command
Display alarm information. display alarm
Display the current CPU usage statistics. display cpu-usage
Display the current configuration of the gateway. display current-configuration
Display device information. display device
Display the temperature statistics about the device. display environment
Display the operating states of fans. display fan
Display interface brief information. display interface brief
Display brief IP configuration information for the specified Layer 3
interface or all Layer 3 interfaces.
display ip interface brief
Display routing table information. display ip routing-table
Display memory usage. display memory
Display power supply information. display power
Display system version information. display version