Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 117)

26 October 2009 K2 Storage Area Network Installation and Service Manual 117
About SiteConfig support on K2 devices
4. Click OK to save settings and close.
About SiteConfig support on K2 devices
Before SiteConfig can be used to discover or manage a device, the device must meet
the following requirements:
• The device must be a Microsoft Windows operating system device.
• The device must have Microsoft .NET version 2.0 installed, as reported in the
Windows Add/Remove Programs control panel.
• The ProductFrame Discovery Agent service must be running on the device, as
Interface Name The device host name with the " _he0" suffix added is required. For example,
if the host name is K2prod01, then K2prod01_he0 is required here.
Set to Default Not recommended. Sets the interface name to SiteConfig default convention,
based on the root Site name and device-type.
Use Interface
Name/Aliases in
Host Files Selected is required
Aliases Not allowed
DNS Suffix Allowed, if applicable to the network. The DNS suffix is added to the
interface name.
Setting... For media (iSCSI) network interface
Network iSCSI (non-Redundant) is required on K2 Media Server for all interfaces of
type iSCSI on basic K2 SAN.
iSCSI (Primary Redundant) is required on K2 Media Server A for all
interfaces of type iSCSI on redundant K2 SAN
iSCSI (Secondary Redundant) is required on K2 Media Server B for interfaces
of type iSCSI on redundant K2 SAN
IP Address The IP address for this interface on the network. Required.
Interface Name Disabled, since names are excluded from the hosts file. Disregard.
Set to Default Disabled, since names are excluded from the hosts file. Disregard.
Use Interface
Name/Aliases in
Host Files Disabled, since names are excluded from the hosts file. Disregard.
Aliases Disabled, since names are excluded from the hosts file. Disregard.
DNS Suffix Disabled, since names are excluded from the hosts file. Disregard.
Setting... For FTP/streaming network interface