Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 350)

26 October 2009 K2 Storage Area Network Installation and Service Manual 350
Configuring a K2 client for the K2 Storage System
Database Client
Configuration
This page connects the K2
client as a media database
client to the K2 Media
Server taking the role of
metadata (database) server.
If there are redundant K2
Media Servers, both are
listed on this page as
database servers.
Verify that the K2 client is connecting to the correct K2 Media Server or
Servers, as follows:
• For Levels 2, 10, 20, and 30, the client connects to the only server.
• For Levels 2R, 10R, 20R,and 30R, the client connects to server A
as database server 1 and sever B as database server 2.
• For Level 3 and Level 35, the client connects to server 1.
• For Level 3R and Level 35R, the client connects to server 1A as
database server 1 and sever 1B as database server 2.
If there are multiple FTP servers (such as the optional NH servers), the
K2 System Configuration application automatically assigns the K2
client to a FTP server to provide optimum FTP bandwidth across the
system.
Do not attempt to change the assignment to a different FTP server as part
of the initial configuration.
Click
Check . When the wizard reports that the configuration check is
successful, click Next .
On this page… Do this…