Grass Valley K2 Summit Storage Area Network v.7.1 - Manual (Page 246)

26 October 2009 K2 Storage Area Network Installation and Service Manual 246
Configuring optional NH servers
Configuring optional NH servers
If you have one or more optional NH K2 Media Servers, you next configure those
servers. This section applies to both NH1 (1 Gig FTP) servers and NH1-10GE (10 Gig
FTP) servers.
NOTE: Multiple NH servers on a K2 SAN must be of the same type, either all NH1
or all NH1-10GE.
1. In the K2 System Configuration application tree view, select the K2 Media Server
you are configuring.
2. Click the Configure button. The Configure K2 Server wizard opens. Follow the
on-screen text to configure the server for a Level 30 K2 SAN, as described in the
following table. Some screens require no input from you, as they are based on the
configurations already completed on a previously configured K2 Media Server.
FTP Server Configuration
This page appears only if the
server has the role of FTP
server.
Do not modify these settings. Leave at default values of Max FTP
streams = 4 and FTP Data Socket Timeout = 60. Only qualified Grass
Valley personnel should specify other values, as these settings are
intended for use only with custom systems designed by Grass Valley.
Click
Next
Completing the
Configuration Wizard Click Finish . The wizard closes. The server restarts. Wait until all
startup processes have completed before continuing.
On this page… Do this…